SD-1 issue

JJB79

Member
Joined
Nov 18, 2022
Messages
24
Reaction score
36
Not the cable as they work fine with other peddles, like my Joyo Vintage overdrive tubescreamer clone. But it looks like this has been messed with before. It also looks like the output is getting kinda flimsy. But I'm only seeing one white wire connected. Thoughts? Does this look like it might have been messed with it? Considering all the parts are radial/axial components on the PCB then through a wave instead of SMT I must have an older version from what I've read? Apparently these can be modded because of the simplicity of switching out these parts vs SMT parts? Obviously I can do the mods myself, so thinking of also what I can do with it now that I know it's not an SMT board.
 

Attachments

  • 20221122_102945_resized.jpg
    20221122_102945_resized.jpg
    272.1 KB · Views: 7
  • 20221122_102956_resized.jpg
    20221122_102956_resized.jpg
    223 KB · Views: 7

JJB79

Member
Joined
Nov 18, 2022
Messages
24
Reaction score
36
Forgot
Not the cable as they work fine with other peddles, like my Joyo Vintage overdrive tubescreamer clone. But it looks like this has been messed with before. It also looks like the output is getting kinda flimsy. But I'm only seeing one white wire connected. Thoughts? Does this look like it might have been messed with it? Considering all the parts are radial/axial components on the PCB then through a wave instead of SMT I must have an older version from what I've read? Apparently these can be modded because of the simplicity of switching out these parts vs SMT parts? Obviously I can do the mods myself, so thinking of also what I can do with it now that I know it's not an SMT board.
to ask, lol was the white wire to the output the only wire to be connected to the output jack?
 


Top