playloud
Well-Known Member
- Joined
- Dec 28, 2020
- Messages
- 1,664
- Reaction score
- 2,567
I recently picked up an old Philips radio near me for a few bucks, reasoning that the Telefunken ECC83 inside (if good) was worth several times that.
As I don't like the idea of destroying things for parts, I also thought it would be fun to try restoring it. The power cord was missing, so I installed an earthed replacement with a local plug. It has a (mono) tape input, with banana plug connections, so I created an adapter from a 3.5mm stereo jack (summing L+R channels) to let me plug in a phone/computer.
After bringing it up on a variac slowly (despite the valve rectifier), spraying the pots with Deoxit, replacing the Telefunken (which works perfectly) with a current production 12AX7 I had lying around, and cleaning the tube sockets, I was somewhat amazed to discover that it functions perfectly well. Voltages matched the schematic and the sound is heavenly. I put it in my music room/office to listen to music when I get tired of headphones/studio monitors.
Now I'm curious. Did I just get lucky with this particular model, or are tube radios still an absolute steal for the sound they can deliver? Does anyone else here use them like this?
Model info/schematic can be found here: https://www.radiomuseum.org/r/philips_b5x95a.html
Interestingly - at least to a primitive guitarist like me - it has no output transformer. Instead, it has extra-high impedance drivers (800 ohm!) fed by an EL86. Aside from the Telefunken, the remaining valves all have Philips codes.
Here's a bonus pic of the insides for anyone who's curious. Note the green "proto-mustards". The resistors with burn marks (?) measured fine when tested.
As I don't like the idea of destroying things for parts, I also thought it would be fun to try restoring it. The power cord was missing, so I installed an earthed replacement with a local plug. It has a (mono) tape input, with banana plug connections, so I created an adapter from a 3.5mm stereo jack (summing L+R channels) to let me plug in a phone/computer.
After bringing it up on a variac slowly (despite the valve rectifier), spraying the pots with Deoxit, replacing the Telefunken (which works perfectly) with a current production 12AX7 I had lying around, and cleaning the tube sockets, I was somewhat amazed to discover that it functions perfectly well. Voltages matched the schematic and the sound is heavenly. I put it in my music room/office to listen to music when I get tired of headphones/studio monitors.
Now I'm curious. Did I just get lucky with this particular model, or are tube radios still an absolute steal for the sound they can deliver? Does anyone else here use them like this?

Model info/schematic can be found here: https://www.radiomuseum.org/r/philips_b5x95a.html
Interestingly - at least to a primitive guitarist like me - it has no output transformer. Instead, it has extra-high impedance drivers (800 ohm!) fed by an EL86. Aside from the Telefunken, the remaining valves all have Philips codes.
Here's a bonus pic of the insides for anyone who's curious. Note the green "proto-mustards". The resistors with burn marks (?) measured fine when tested.
